Table of Contents
Advertisement
DPL
The DPL command language interprets Datamax™ data streams without requiring
any host programming changes. If you are sending DPL label files to the printer,
select DPL as your printer command language.
Smart Printing
Smart Printing refers to the ability of the printer to independently run printing
operations without being connected to a host computer. If you are running
printer-based applications written in C#, select Smart Printing as your printer
command language.
Access the Printer Web Page
1.
2.
3.
You will be prompted for a user name and password. The defaults are:
After logging in, you will be prompted to change your password.
Set the Printer Command Language
You can use one of these methods to change the printer command language:
•
•
•
•
From the Printer Web Page
To set the command language from the printer web page, you need to turn on the
printer and connect to your network.
1.
2.
3.
8
Open a browser window on your PC.
In the location or address bar, type the printer IP address and press Enter.
Click Login. The Login page appears.
•
User Name: itadmin
•
Password: pass
From the printer web page
From the Main Menu
PrintSet 5
Print Set MC
Make sure that the printer has media and ribbon installed (if necessary).
Follow the directions to
Once you are logged in to the printer web page, click the Configure tab.
Access the Printer Web
Page.
PX940 User Guide
Advertisement
Table of Contents
