Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 34


Press the Right Knob [36] to continue.
Figure 64.

Press the Left Knob [35] or Button [37] to
exit

Recording icon will appear on the Status
bar [38].
Note: To stop the recording go to Service Menu and
press the Service weld logs icon again
Weld history – after recording, welding
parameters are saved into the USB device
folder. To access the Welding history:

Make sure that USB device is connected.

Access to the Settings and Configuration Menu.

Go to Service Menu → Weld History
Figure 65.

Press the Right Knob [36] to get access of Weld
history – the list of used parameters:

Weld number

Average WFS

Average current [A]

Average voltage [V]

Arc time [s]

Welding program number

Job number/name
English
SnapShot - create a file that contains detailed
configuration
collected from each module in the DIGISTEEL
385C PRO & 455C PRO. This file can be sent
to Lincoln Electric Support to troubleshoot any possible
issues that cannot be easily resolved by the user.
To obtain a SnapShot:

Make sure that USB device is connected.

Go to Configuration → Service Menu → Snapshot

Press the Right Knob [36] to start Snapshot process.
30
and debugging information
Figure 66.
Figure 67.
English