Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 16

User Interface Advanced (U7)
Figure 4.
34. Display: 7" TFT display shows welding processes
parameters.
Table 2. Different display veiew
English
Figure 5.
Figure 6.
12
35. Left Knob: Sets the value in the top Left corner of the
display. Cancel selection. Return to the previous
menu.
36. Right Knob: Sets the value in the top Right corner of
the display. Confirmation of changes.
37. Button: It enables return to main menu.
Users have access to the two different views of
interface:

Standard view (Figure 5.)

Advanced view (Figure 6.)
To choose the view of interface:

Press the Button [37] or Right Knob [36].

Use the Right Knob
"Configuration" icon.

Press the Right Knob [36] to confirm decision.

Use the Right Knob [36] to highlight "UI look" icon.

Press the Right Knob [36] to confirm decision.

Select one of the view (Standard – Figure 5. or
Advanced – Figure 6.).

Press the button [37] or Left Knob [35] to return to
main menu.
Functions of Interface
Components
38. Status bar.
39. The measured value of
40. The measured value of
41. Parameter Value (wire feed
42. Parameter Value (voltage,
43. Welding Parameter
44. Welding Parameters Bar.
[36] to highlight
current.
voltage.
speed or current) regulated by
Left Knob [35].
trim or power) regulated by
Right Knob [36].
Visualization.
English
the