Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 28

Job Mode – user has access to operate only
with selected jobs.
Note: First of all user have to select jobs
which can be used in Job Mode (Access Control ->
Select Jobs for Job Work)
To activate Job Mode:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the Job Mode
icon.
Figure 52.

Press the Right Knob [36]. The Job Mode Menu is
shown on the display.

Use the Right Knob [36] to highlight one of the option
shown on the figure below.
X - Cancel Job Mode
 - Activate Job Mode
Figure 53.

Press Right Knob [36] to confirm the selection.
Note: After activated Job Mode the icon of this function
will be displayed on the Welding Parameters Bar.
Also the Load Memory and Save Memory options will be
blocked in this mode.
English
Set the Language – user can choose
interface language (English, Polish, Finnish,
French, German, Spanish, Italian, Dutch,
Romanian).
To set the language:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the Set the
Language icon.

Press the Right Knob [36]. The Language Menu is
shown on the display.

Use the Right Knob [36] to choose the Language.

Confirm the select – press the Right Knob [36].
24
Figure 54.
Figure 55.
English