Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 27

Enable/ Disable Jobs –
off/on jobs to function Save Memory.
To enable/ disable jobs:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the icon:
Figure 46.

Press the Right Knob [36] to confirm. The
Enable/Disable Jobs menu is shown on the display.
Figure 47.

Use the Right Knob [36] to highlight the job number.
The icon of chosen job will disappear from the lower
part of the display.
Figure 48.
English
allows to switch
it
23
Note: The jobs which are disabled can not be using in
"Save memory" function – shown in Figure 49. (job 2 is
not available).
Figure 49.
Select Jobs for Job Work – it allows to
choose which jobs will be enable when Job
Mode will be activated.
To select Jobs for Job Work:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the icon.
Figure 50.

Press the Right Knob [36] to confirm.

Use the Right Knob [36] to highlight the job number.

Press the Right Knob [36] to confirm – the icon of
chosen parameter will appear on the lower part of
the display.
Figure 51.

Press Button [37] to return to main menu.
English