Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 21

Load memory
Recall the stored programs from the user
Memory.
To recall the Welding Program from the User Memory:
Note: Before using, the Welding Program had to be
assigned to the user memory

Add the Load memory icon to the Welding
Parameters Bar.

Use the Right Knob [36] to highlight the Load
memory icon.

Press the Right Knob [36] to confirm – the Load
Memory Menu is shown on the display.

Use the Right Knob [36] to highlight the Memory
number which from the Welding Program will be
recall.

Confirm the select – press the Right Button [36].
Save Memory: Store the welding programs
with their parameters to one of the fifty user
Memories.
To save memory:

Add Save Memory icon to Welding Parameters Bar.

Use the Right Knob [36] to highlight the icon Save
Memory.
Figure 18.

Press the Right Knob [36] to confirm – the Save
Memory Menu is shown on the display .

Use the Right Knob to highlight the memory number
where the program would be stored.
Figure 19.
English

Confirm the selection – Press and hold for 3 second
Right Knob [36].

Rename job – turn Right Knob [36] to select:
numbers 0-9, letters A-Z, a-z. Press Right Knob [36]
to confirm first character of the name.

Next characters are selected in the same.

To confirm the name of job and back to the main
menu press Button [37] or Left Knob [35].
USB
When the USB storage device is connected
to USB port – user have access to:
Table 6. USB Menu
Symbol Description
Save
Load
Save - the following data can be save on a USB Memory
Stick:
Table 7. Save and restore selection
Symbol Description
Current Welding Settings
Advanced Parameters Configuration
(P menu)
All welding programs stored in user
M
memory
One of the welding programs stored in
user memory
17
Figure 20.
English