Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 26

Lock – it allows to set the password. To set
the password:

Access to the Settings and Configuration
Menu.

Use the Right Knob [36] to highlight the Lock icon.
Figure 41.

Press the Right Knob [36]. The password setting
menu is shown on the display.
Figure 42.

Turn Right Knob [36] to select: numbers 0-9,

Press Right Knob [36] to confirm first character of the
password.

Next numbers are selected in the same method.
Note: After setting last
automatically.
English
character system exit
Lock function
functions on welding parameters bar. To lock
functions:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the Lock
functions icon.

Press the Right Knob [36]. The Lock Function menu
is shown on the display.

Use the Right Knob [36] to highlight the function (for
example "Advanced setup").

Press the Right Knob [36]. The icon of chosen
parameter will disappear from the lower part of the
display (Figure 45.). Also this parameter disappear
from the Welding parameters bar [44].
Note: To unlock function user have to do the same
steps as steps to lock function.
22
it allows to lock/unlock some
–
Figure 43.
Figure 44.
Figure 45.
English