Lincoln Electric SAF-FRO DIGISTEEL 385C PRO Operator's Manual page 24

Settings and Configuration Menu
To access the Settings and Configuration Menu:

Press the Button [37] or Right Knob [36] to get
access of Welding Parameters Bar.

Use the Right Knob [36] to highlight the icon
"Configuration".

Press the Right Knob [36] to confirm the selection.
Figure 33.
Table 8. Configuration Menu
Symbol Description
Set the Memory Limits
Set the Display Configuration
Set the Brightness Level
Lock / Unlock
Job Mode
Set the Language
Restore Factory Setting
View Software and Hardware Version
Information.
Access to the Configuration Menu
Cooler Menu
Service Menu
English
Limits allows the operator to set the limits
– it
of main welding parameters in selected job.
The Operator is able to adjust the parameter
value within specified limits.
Note: The Limits can be set only for the programs stored
in the user memory.
The limits can be set for:

Welding Current

Wire Feed Speed

Welding Voltage

Wave Controls
To set the range:

Enter to the Settings and Configuration Menu.

Use The Right Knob [36] to higlight the "Limits" icon.

Press the Right Knob [36] to confirm. List with
available job will be displayed on the screen.

Use the Right Knob [36] to highlight the job.

Press the Right Knob [36] to confirm selection.
20
Figure 34.
Figure 35.
Figure 36.
English