On-Board Air Compressor System with
Wireless Controller and Smartphone App
Introduction
WirelessAir components include a wireless controller, manifold, wiring harness,
compressor, and all accessories needed to connect to vehicle power as well as to the
air springs (purchased separately).
NOTATION EXPLANATION
Hazard notations highlight information that must be observed to help minimize risk of
personal injury or possible improper installation, which may render the vehicle unsafe.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL
DANGER
INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
WARNING
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE
CAUTION
TO THE MACHINE OR MINOR PERSONAL INJURY.
TOOLS LIST
Description ................................................. Qty
Power drill .............................................................1
1/4", 3/8" & 3/16" Drill bits .............................1 ea.
7/16" & 3/8" Sockets and ratchet ..................1 ea.
MN-1092 • (022208) • ECR 10025
IMPORTANT: PLEASE READ BEFORE INSTALLING
IT IS IMPORTANT TO READ AND UNDERSTAND THE ENTIRE INSTALLATION GUIDE
BEFORE BEGINNING INSTALLATION OR PERFORMING ANY MAINTENANCE,
SERVICE OR REPAIR. THE INFORMATION HERE INCLUDES A HARDWARE LIST,
STEP-BY-STEP INSTALLATION INFORMATION AND SAFETY INFORMATION.
USING THE SYSTEM
Refer to the WirelessAIR™ User Guide included with this kit
to learn how to operate the system and connect your mobile
device to the system.
Installation Guide
WirelessAir User Guide
Description ................................................. Qty
Wire stripping/crimping tool .................................1
Sharp razor knife ..................................................1
Kit Number
74000
User Guide
1