Table Of Contents - Emerson Rosemount MultiVariable 3051S Series Quick Start Manual

Quick Start Guide
Safety messages
WARNING
Explosions could result in death or serious injury.
Installation of device in an explosive environment must be in accordance with appropriate
local, national, and international standards, codes, and practices.
Review Rosemount 3051SMV F
associated with a safe installation.
• Before connecting a handheld communicator in an explosive atmosphere, be sure that
the instruments in the loop are installed in accordance with intrinsically safe or non-
incendive field wiring practices.
• In an explosion-proof/flame-proof installation, do not remove the transmitter covers
when power is applied to the transmitter.
Process leaks could result in death or serious injury.
• Install and tighten process connectors before applying pressure.
Electrical shock could cause death or serious injury.
• Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
Conduit/cable entries
• Unless marked, the conduit/cable entries in the housing use a ½-14 NPT thread form.
Entries marked M20 are M20 × 1.5 thread form. On devices with multiple conduit entries,
all entries will have the same thread form. Only use plugs, adapters, glands, or conduit
with a compatible thread form when closing these entries.
• When installing in a hazardous location, use only appropriately listed or Ex certified
plugs, glands, or adapters in cable/conduit entries.
NOTICE
This guide provides basic guidelines for Rosemount
F Fieldbus Transmitters. It does not provide instructions for diagnostics,
™
OUNDATION
maintenance, service, or troubleshooting. Refer to the Rosemount 3051SMV F
Fieldbus Reference Manual
electronically on Emerson.com/Rosemount.
Contents
Mounting the transmitter........................................................................................................... 5
Tagging....................................................................................................................................... 12
Consider housing rotation........................................................................................................13
Set the switches......................................................................................................................... 15
Wiring, grounding, and power................................................................................................. 17
System readiness....................................................................................................................... 22
Zero trim the transmitter..........................................................................................................23
2
Fieldbus
OUNDATION
for more instruction. This document is also available
Reference Manual for any restrictions
3051S MultiVariable
™
Rosemount 3051SMV
January 2024
(3051SMV)
™
OUNDATION