Installing/mounting
4.4 Solids applications
4.4.3
Probe mounting distances - solids
Probe distance
Observe nozzle length.
Oblique mounting
Observe mounting angle to ensure, that the active tip of the probe has enough distance to
the metal silo wall.
Observe minimum distance between two probes, to metal vessel wall, and to protective
angle.
20
Horizontal mounting
①Correct
Probe leads into the prod-
uct
②Wrong
Nozzle too long
SITRANS LCS100 I/O Link Version
Operating Instructions, 05/2023, A5E52382716-AA