4.4.2
LCS100 rod version
Observe:
• General distances of the probe, see Probe mounting distances - solids (Page 20).
• Distance to material flow (filling)
• Max. permitted mechanical load, see Environmental (Page 65).
• Wearing due to abrasive bulk material
① Full detector vertical
② Full detector with sliding sleeve
③ Full detector horizontal or oblique. Slight incline mounting helps remaining material to fall off
more easily
④ Demand or empty detector horizontal or oblique. Slight incline mounting helps remaining material
to fall off more easily. Protective angle recommended depending on load and abrasion of the ma-
terial
SITRANS LCS100 I/O Link Version
Operating Instructions, 05/2023, A5E52382716-AA
CAUTION
Installing/mounting
4.4 Solids applications
19