Radio Detectors - EMS SYSTEM 5000 Installation Manual

SYS5INST ISS.3 2000

5.5 Radio Detectors

5.5.1 Ensure that all Detectors are sited in accordance with the survey and design
details and that, wherever practical, the red LED faces the main entrance to the room.
5.5.2. If the Detectors are complete, remove the ceiling mounting plate by first
disengaging the detector head by turning it counter clockwise. This exposes the Radio
PCB (see figure 4). If only the mounting plate is being fitted at this time, refer to
section 5.5.4.
5.5.3. Disengage the ceiling mount by pressing down the locking pin (see figure 5)
and turning the radio module counter clockwise whilst pushing it against the ceiling
mount. The ceiling mount will now be available for fixing to the ceiling. Ensure that
the Detector head is suitably stored so as to prevent the possibility of accidental
damage.
9