Technical Information - EMS SYSTEM 5000 Installation Manual

Dimensions:
Operating Frequencies:
Operating Temperature
Humidity
Channel Spacing:
Output Transmitter Power
Supply
Operating Voltages
Battery space
Inputs
Outputs
Standards

TECHNICAL INFORMATION

FOR THE
5000 CONTROLLER
330mm x 450mm x 116mm
VHF – 173.2 MHz – 173.5Mhz (receiver)
UHF – 458.5 MHz – 589.5 MHz (transmitter)
-10 to 55 degrees C
Up to 75% non-Condensing.
25 kHz
0.75W (500 mW) ( + 27DBH)
240v 50 Hz
24v DC nominal
2 x 12volt 7Ah batteries not supplied
1 x 27v DC
2 x 0.25amp 24v DC sounder outputs
2 x auxiliary fire relays
2 x auxiliary fault relays
1 x RS 485 serial port
1 x RS 232 serial port
Designed to comply to BS5839 part 4 and
EN54 - 2