Table of Contents
Advertisement
Unlocking the Shock Mounts
1
You are directed here from your
system instructions. Using these
procedures, you will prepare the
9332 for operation with a host or a
system.
Warning:
Be sure to unlock the
shock mounts before you operate
the 9332; otherwise, there could be
damage to the 9332.
The shock mounts may have
already been unlocked from a pre-
vious procedure.
If you have already unlocked the
shock mounts, continue to "Setting
the Address Switch" on page 3-4.
2
Remove the front cover.
3
Find the shock mount locking stud.
3-2
Installing
RD1 C037-0
RD1C036-0
Advertisement
Table of Contents
