Table of Contents
Advertisement
2
Remove the two screws that hold
the brackets to the rails.
Notes:
1. Use the tightening rod to loosen
the screws.
2. Your 9332 could have been
shipped with standard type
screws. Use a suitable tool to
loosen the screws.
3
CAUTION:
The 9332 weighs approximately 30
kilograms (65 pounds). It takes two
or more persons to safely lift and
remove the disk unit from the rack.
Be sure you have a good hold of the
9332 as you slide it out of the rack.
If there is no unit installed in the
rack above the 9332, the 9332 can
tip and fall out once it gets more
than half way out.
Remove the 9332 from the rack.
RD1 C053·1
RD1 C061-0
Advertisement
Table of Contents
