Table of Contents
Advertisement
7
Position the two rails:
• Get the rails and go to the
front of the rack.
• Place the rails so that the
U-shaped ends point to the
rear.
8
Note:
The remaining steps require
two people. Read these steps before
you do them.
9
Install the rear portion of the right
rail:
Note:
One person should stand in
front of the rack, another person at
the rear of the rack.
• Place the U-shaped end around
the rear frame.
• Insert the support pins that
stick out from the rail so that
the nut clip is between the two
pins.
Left
Rail
RD1 C069-0
RD1 C070-0
...
,.,
Advertisement
Table of Contents
