Flashforge Adventurer 5M User Manual page 4

SAFETY NOTICE: PLEASE CAREFULLY READ AND STRICTLY FOLLOW
ALL THE SAFETY WARNINGS AND NOTICES BELOW ALL THE TIME.
Note: Each 3D printer undergoes printing tests before leaving the factory. Filament
residue on the nozzle or slight scratches on the build plate are normal and do
not affect usage.
Please keep the workspace clean and tidy.
Please ensure the equipment operates away from combustible gases, liquids, and
dust. High temperatures generated during operation may react with combustible
gases, liquids, or airborne dust, potentially causing fires.
Children and untrained individuals should not operate the equipment alone.
Please properly ground the equipment. Do not modify the plug. Ungrounded
equipment/improperly grounded equipment/modified plug will inevitably increase
the risk of electric leakage.
Avoid exposing the equipment to damp or direct sunlight environments. Humidity
will increase the risk of electric leakage. Exposure to sunlight will accelerate the
aging of plastic parts.
Make sure to only use the power cord provided by Flashforge.
Do not use the equipment during thunderstorms.
Please turn off the equipment and unplug it if it is not in use for a long time.
Do not touch the extruder, build plate, etc., during printing.
Do not touch the extruder and build plate after finishing printing to avoid high
temperature burns or mechanical damage.
Do not wear scarves, masks, gloves, jewelry, or other objects that can easily get
tangled into the equipment while operating it.
Do not operate the equipment while you are tired or under the influence of drugs,
alcohol or medication.
Keep the inside of the equipment clean. Do not drop metal objects into the grooves
at the bottom of the build plate.
Please clean up filament debris in time. It is recommended to operate this outside
the equipment.
Any modification of the equipment by yourself will void the warranty.
Please keep the distance between the extruder and build plate for at least 50mm
during filament loading. Too-close distance may cause nozzle clogs.
Please operate the equipment in a well-ventilated environment.
Do not use the equipment for illegal activities.
Do not use the equipment to make food storage containers.
Do not place printed models into your mouth.
NOTICE
WORK ENVIRONMENT SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
CAUTIONS
02