Flashforge Adventurer 5M User Manual page 16

4. Bind the printer following the instructions.
(Note: If skipped, binding can still be done
later on the printer; see Page 17.)
a. After clicking [OK], the QR code page will
appear.
b. Download Flash Maker by scanning the
QR code (see right) or from the app
store, register your Flashforge account,
and log in.
c. Use Flash Maker to scan the QR code on
the printer screen to bind the printer to
your account. (Note: Default printer
name and location are set upon leaving
the factory; after completing the startup,
you can customize the printer name and
location in the settings.)
5. Click [Next] and the machine will perform the first calibration. Vibrations and noise during
calibration are normal.
(Note: Please keep the machine on a stable surface and do not move it during calibration.)
14
QR Code