Flashforge Adventurer 5M User Manual page 21

1.Open the installed Orca-Flashforge.
3. Account Login/Register:
Log in to Orca-Flashforge using your
Flashforge account. If you don't have
an account, register one using your mobile
phone number. (Note: Flash Maker and
Orca-Flashforge share the same account.)
5. After slicing, select the printer and
send for printing.
3DBenchy
2. Setup Wizard:
Follow the setup wizard prompts for selecting
your region, machine type, and materials.
(Note: You can select all machine types and
material types in the list for later slicing options.)
4. Create or open a project for slicing. You can
select the machine type, material, and
recommended parameters in the printer,
filament, and process bars.
6. You can remotely monitor the printing progress
and pause/stop printing when necessary on
the device interface. (Note: Real-time
monitoring is only available with a camera
installed and activated.)
19
Printing plate
File:3DBenchy.3mf