HIKVISION DS-2CD3956G2-IS(U) User Manual page 68

Steps
Note
This function is only supported by certain models.
1. Go to Configuration → Event → Basic Event → Alarm Output .
2. Set alarm output parameters.
Automatic Alarm For the information about the configuration, see Automatic Alarm .
Manual Alarm
3. Click Save.
Manual Alarm
You can trigger an alarm output manually.
Steps
1. Set the manual alarm parameters.
Alarm Output No.
Select the alarm output No. according to the alarm interface connected to the external alarm
device.
Alarm Name
Custom a name for the alarm output.
Delay
Select Manual.
2. Click Manual Alarm to enable manual alarm output.
3. Optional: Click Clear Alarm to disable manual alarm output.
Automatic Alarm
Set the automatic alarm parameters, then the device triggers an alarm output automatically in the
set arming schedule.
Steps
1. Set automatic alarm parameters.
Alarm Output No.
Select the alarm output No. according to the alarm interface connected to the external alarm
device.
Alarm Name
Custom a name for the alarm output.
Delay
Network Camera User Manual
For the information about the configuration, see Manual Alarm .
60