Table of Contents
Advertisement
2. Drag the mouse on the image to select a desired rectangle area.
The width pixel and height pixel are displayed on the bottom of the live view image.
Start Digital Zoom
It helps to see a detailed information of any region in the image.
Steps
1. Click
to enable the digital zoom.
2. In live view image, drag the mouse to select the desired region.
3. Click in the live view image to back to the original image.
Auxiliary Focus
It is used for motorized device. It can improve the image if the device cannot focus clearly.
For the device that supports ABF, adjust the lens angle, then focus and click ABF button on the
device. The device can focus clearly.
Click
to focus automatically.
Note
If the device cannot focus with auxiliary focus, you can use Lens Initialization , then use auxiliary
●
focus again to make the image clear.
If auxiliary focus cannot help the device focus clearly, you can use manual focus.
●
Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Manual Lens Initialization
Click
to operate lens initialization.
Auto Lens Initialization
Go to Configuration → System → Maintenance → Lens Correction to enable this function. You
can set the arming schedule, and the device will correct lens automatically during the
configured time periods.
Network Camera User Manual
15
Advertisement
Table of Contents
