Table of Contents
Advertisement
3. Set the arming schedule. See Set Arming Schedule for details.
4. Click Save.
Note
Only certain device models support the function.
Audible Warning
After enabling Audible Warning and setting Audible Alarm Output, the built-in speaker of the
device or connected external speaker plays warning sounds when an alarm happens.
For audible alarm output settings, refer to Set Audible Alarm Output .
Note
The function is only supported by certain camera models.
Set Audible Alarm Output
When the device detects targets in the detection area, audible alarm can be triggered as a
warning.
Steps
1. Go to Configuration → Event → Basic Event → Audible Alarm Output .
2. Select Sound Type and set related parameters.
- Select Prompt and set the alarm times you need.
- Select Warning and its contents. Set the alarm times you need.
- Select Custom Audio. You can select a custom audio file from the drop-down list. If no file is
available, you can click Add to upload an audio file that meets the requirement. Up to three
audio files can be uploaded.
3. Optional: Click Test to play the selected audio file on the device.
4. Set arming schedule for audible alarm. See Set Arming Schedule for details.
5. Click Save.
Note
The function is only supported by certain device models.
2.9 System and Security
It introduces system maintenance, system settings and security management, and explains how to
configure relevant parameters.
Network Camera User Manual
63
Advertisement
Table of Contents
