Table of Contents
Advertisement
The video is recorded when configured event is detected.
4. Set schedule for the selected record type. Refer to Set Arming Schedule for the setting
operation.
5. Click Advanced to set the advanced settings.
Overwrite
Enable Overwrite to overwrite the video records when the storage space is full. Otherwise
the camera cannot record new videos.
Pre-record
The time period you set to record before the scheduled time.
Post-record
The time period you set to stop recording after the scheduled time.
Stream Type
Select the stream type for recording.
Note
When you select the stream type with higher bitrate, the actual time of the pre-record and
post-record may be less than the set value.
Recording Expiration
The recordings are deleted when they exceed the expired time. The expired time is
configurable. Note that once the recordings are deleted, they can not be recovered.
6. Click Save.
Record Manually
Steps
1. Go to Configuration → Local .
2. Set the Record File Size and saving path to for recorded files.
3. Click Save.
4. Click
in the live view interface to start recording. Click
Set Lite Storage
After the lite storage is enabled, the frame rate and bitrate of the video stream can be reduced to
lengthen the storage time of the memory card when there is no moving object in the monitoring
scenario.
Steps
1. Go to Configuration → Storage → Storage Management → Lite Storage .
2. Check Enable and set the level. The higher the level is, the larger the frame rate and bitrate are,
and the shorter the recommended storage time is.
Network Camera User Manual
40
to stop recording.
Advertisement
Table of Contents
