Table of Contents
Advertisement
Image switch is disabled.
Auto-Switch
The system switches day/night mode automatically according to environment. It displays
colored image at day and black and white image at night.
Scheduled-Switch
The system switches day/night mode according to the schedule. It switches to day mode
during the set periods and switches to night mode during the other periods.
Sensitivity
The higher the value of sensitivity is, the more sensitive the motion detection is. If scheduled
image settings is enabled, the sensitivity of day and night can be set separately.
3. Select an Area and click Draw Area. Click and drag the mouse on the live image and then release
the mouse to finish drawing one area.
Stop Drawing Finish drawing one area.
Clear All
4. Click Save.
5. Optional: Repeat above steps to set multiple areas.
Normal Mode
You can set motion detection parameters according to the device default parameters.
Network Camera User Manual
Figure 2-8 Set Rules
Delete all the areas.
44
Advertisement
Table of Contents
