Event And Alarm; Basic Event - HIKVISION DS-2CD3956G2-IS(U) User Manual

Note
Go to Configuration → Local , click Save snapshots when playback to change the saving path of
pictures.

2.6 Event and Alarm

This part introduces the configuration of events. The device takes certain response to triggered
alarm.

2.6.1 Basic Event

Set Motion Detection
It helps to detect the moving objects in the detection region and trigger the linkage actions.
Steps
1. Go to Configuration → Event → Basic Event → Motion Detection .
2. Check Enable Motion Detection.
3. Optional: Highlight to display the moving object in the image in green.
1) Check Enable Dynamic Analysis for Motion.
2) Go to Configuration → Local .
3) Set Rules to Enable.
4. Select Configuration Mode, and set rule region and rule parameters.
- For the information about normal mode, see Normal Mode .
- For the information about expert mode, see Expert Mode .
5. Set the arming schedule and linkage methods. For the information about arming schedule
settings, see Set Arming Schedule . For the information about linkage methods, see Linkage
Method Settings .
6. Click Save.
Expert Mode
You can configure different motion detection parameters for day and night according to the actual
needs.
Steps
1. Select Expert Mode in Configuration.
2. Set parameters of expert mode.
Scheduled Image Settings
OFF
Network Camera User Manual
43