MTU 16V4000L32FNER Operating Instructions Manual page 30

Pressure in cooling system, max.
Pressure loss over LT mixture cooler (at nominal flow rate)
Table 10: Coolant system (LT circuit, referenced to max. power without HT heat recovery)
Lube oil system (referenced to max. power without HT heat recovery)
Lube oil operating temperature after oil heat exchanger, from
Lube oil operating temperature after oil heat exchanger, to
Lube oil operating temperature after oil heat exchanger, warning
Lube oil operating temperature after oil heat exchanger, shutdown
Lube oil pressure after oil filter
Lube oil pressure after oil filter, warning
Lube oil pressure after oil filter, shutdown
Table 11: Lube oil system (referenced to max. power without HT heat recovery)
Fuel system
Gas temperature before engine, min.
Gas temperature before engine, max.
Gas flow pressure before gas control valve, min.
Gas flow pressure before gas control valve, max.
Table 12: Fuel system
General operating data
Cold start capability: Air temperature (w/o starting aid, with preheating) -
(case C)
Site condition (for case C): Engine coolant temperature
Minimum idling speed
Limit speed for overspeed alarm/emergency shutdown
Table 13: General operating data
30 | Technical Data | MS150121/02E 2017-09
L bar
bar
R °C
R °C
R °C
L °C
bar
bar
L bar
L °C See MTU
Fluids and
Lubricants
Specifica-
tions
L °C See MTU
Fluids and
Lubricants
Specifica-
tions
L mbar See MTU
Fluids and
Lubricants
Specifica-
tions
L mbar See MTU
Fluids and
Lubricants
Specifica-
tions
R °C
R °C
A rpm 1500
L rpm 1900
6.0
0.4
82
90
93
97
5.5
5.0
4.5
15
40