MTU 16V4000L32FNER Operating Instructions Manual page 117

1.4540.048 – SPI ADC Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for operation.
1.4540.049 – Sense 5V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for operation.
1.4540.050 – Sense -9V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for operation.
1.4540.051 – Sense 12V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for operation.
1.4540.052 – ADC Test Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for operation.
1.4540.053 – CAN Timing Changed
Yellow alarm. Initiated by TecJet.
Cause
Change of CAN baud rate
detected.
1.4540.054 – Exception Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for operation.
Corrective action
1. Restart TecJet.
2. Replace TecJet.
Corrective action
1. Restart TecJet.
2. Replace TecJet.
Corrective action
1. Restart TecJet.
2. Replace TecJet.
Corrective action
1. Restart TecJet.
2. Replace TecJet.
Corrective action
1. Restart TecJet.
2. Replace TecJet.
Corrective action
1. Check TecJet settings.
2. Check cabling (→ Page 202).
Corrective action
1. Restart TecJet.
2. Replace TecJet.
MS150121/02E 2017-09 | Troubleshooting | 117