MTU 16V4000L32FNER Operating Instructions Manual page 191

7.8 Oil Filtration / Cooling
7.8.1 Engine oil filter – Replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Oil filter wrench
Engine oil
Oil filter
WARNING
Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
WARNING
Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.
Engine oil filter – Replacement
1. Unscrew oil filter with oil filter wrench.
2. Clean sealing surface on connecting piece.
3. Check condition of new sealing ring and coat
it with oil.
4. Screw on and tighten new oil filter by hand.
5. Replace other oil filters in the same way.
6. Check oil level (→ Page 188).
(→ Spare Parts Catalog)
MS150121/02E 2017-09 | Oil Filtration / Cooling | 191
Part No. Qty.
F30379104 1