Panasonic AlCare TK-AS500 Operating Instructions Manual page 16

Installation 3
Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
Inside-screwed faucet
• Water faucet to which the Alkaline Ionizer
can be installed with an accessory.
1
Screw in the bushing. Insert it
into the bypass selector.
2
Attach the bypass selector and
tighten the nut until the bypass
selector does not turn.
The bypass selector should be
z
screwed straight. Screwing it at
an angle may strip the threads,
resulting in water leaks.
Do not use any tools.
z
(Doing so may damage the nut.)
When water leak occurs after
„
attaching the nut and adaptor
Use the gasket attached on the
faucet.
EN16
Attach the bypass selector
Aerator (not used)
y Do not use the removed aerator.
Bushing (Accessory)
Gasket
Bypass selector
Bypass
selector
(continued)
Nut