Panasonic ER-Q Instruction Manual

Static Remover Ultra-compact Fan Ionizer
ER-Q
Thank you very much for using Panasonic products. Please read this
Instruction Manual carefully and thoroughly for the correct and optimum use
of this product. Kindly keep this manual in a convenient place for quick
reference.
WARNING
Never use this product with a device for personnel protection.
In case of using devices for personnel protection, use products which meet laws
or standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable
in each region or country.
�����������������������������������������������������������������������������
combustible items being present.
��������������������������������������������������������������������������������
about once a month), otherwise optimum charge removal performance may not be
�������������������������������������������������
If this product is used in an airtight room, ozone emitted from this product may be
detrimental. Therefore, in order for this product to be used in an airtight room, be
sure to keep the room ventilated.
Do not direct ionized air toward the face. Ozone may cause irritation to places
such as the nose and throat.
������������������������������������������������������������������������������������
discharge needle, or injuries may result.
Be sure to ground the frame ground (F.G.) terminal, otherwise electric charge
removal may not be reliable.
Take care not to let any foreign objects get into the fan air inlet, otherwise
accidents or operating problems may occur.
1 OUTLINE
This is a static charge remover which utilizes ion generation by means of corona
discharge.
It has a compact shape, so that it can be positioned either vertically or horizontally.
It is equipped with an automatic stop function which operates when the discharge
needle unit has been removed.
2 PART DESCRIPTION
65
3.5
58
Ion air outlet
Filter cover
�3.7 mm cable
Discharge needle unit
Connector 5559-08P
manufactured by MOLEX
2-M3 screws (depth 10 mm) (Note 2)
Notes: 1) Fan speed control
This is set to MAX fan speed at the time of shipment from the factory.
Use a precision screwdriver (-) to adjust the fan speed.
2) Screw threads exclusive for SUNX mounting brackets. Do not use them in mounting with
other products.
�����������������������������������������������������������������������������������������
mounting holes.
Description of indicators
Discharge indicator (DSC) ... Lights during discharge
(when ions are being generated)
Alarm indicator (ALARM) ... Lights when discharge error or discharge checking
occurs, blinks when fan error occurs.
Ramco National
INSTRUCTION MANUAL
CMJE-ERQ No.0031-24V
Fan speed control
(Note 1)
Alarm indicator
(red)
Discharge indicator
(green)
Power switch
29
33
5.5
800-280-6933 | nsales@ramcoi.com
3 INPUT AND OUTPUT CIRCUIT DIAGRAM
D
1
D
2
Tr
1
D
ZD
3
1
Tr
2
ZD
2
Internal circuits
Connector pin layout diagram
Terminal no. Terminal name Lead wire color
0 V Blue
COM (-)
N.C. (Not used)
F.G. Green
24 V Brown
COM(+)
Check output Orange
Error output Black
4 MOUNTING
Be sure to turn off the power before carrying out angle adjustment for this
●
product, otherwise accidents or problems with operation may occur.
If installing this product directly to the enclosure, use M3 screws. (M3 screws
should be arranged separately.)
If using the ER-QMS1 (optional mounting bracket), use the screws provided with
the mounting bracket.
If using SUNX mounting bracket or screws other than the ER-QMS1, do not use
screws which are longer than 10 mm, otherwise they may cause damage to
internal parts when fastened.
Tightening torques are 0.5 N ・ m for M3 screws and 1.2 N ・ m or less for M4 screws.
If using several of these products alongside each other, leave a space of 50 mm
or more between each product, otherwise product performance may be adversely
affected.
[If installing this product directly to the enclosure]
M3 screw
Spring washer
Flat washer
[If using the ER-QMS1 (optional mounting bracket)]
M3 sems screw
Bracket 1
2-M3 screw
(depth 10 mm)
M4 screw
mounting hole
Install bracket 1 to the main unit with the M3 screws.
Install bracket 2 to the main unit with the M4 sems screws, and then use the M4 screw
mounting holes to install to the enclosure.
* The M3 and M4 screws are included with the ER-QMS1.
5
OPTIONS
AC adapter
Model No. Details
IN: 100 to 240 V AC, 50/60 Hz, 40 VA
ER-VAPS1
OUT: 24 V DC, 750 mA
Replacement discharge needle unit
Model No. Details
ER-QANT
Unit with tungsten needles
Replacement air filter
Model No. Details
ER-QFX5
5-piece air filter set
6 CARE AND MAINTENANCE
● Be sure to turn off the power before carrying out cleaning and maintenance.
The discharge needle has a sharp point, so be very careful when cleaning the
●
needle.
● After long periods of use, dirt may adhere to the discharge needles, the area
around them and the filter. If these areas are not cleaned, charge removal
performance will drop and accidents or problems with operation may occur.
Therefore they should be periodically cleaned (discharge needles: about once
���������������������������������������
(Brown) +24 V
COM (+)
(Orange) Check output
Load
24 V DC
±10
50 mA MAX
(Black) Error output
Load
50 mA MAX
30 V
DC MAX
(Blue) 0 V
COM(-)
(Green) F.G.
User's circuits
D : Power supply reverse connection
1
protection diode
D , D : Output protection diodes
2 3
ZD , ZD : Surge voltage absorption Zener diodes
1 2
Tr , Tr : NPN output transistors
1 2
Front view
M4 sems screw
Bracket 2
Cable with connectors
Model No. Details
ER-QCC2
Cable length 2 m
ER-QCC5
Cable length 5 m
Mounting bracket
Model No. Details
Mounting bracket for air
ER-QMS1
direction adjustment
www.panasonicsensors.com
● The d
not re
that y
you re
[Cleanin
Follow
Use a
and th
If the
with a
A com
the dis
Insert
the dis
[Discha
1
* Do not
needle
* Do not
dischar
���������
����������
Turn the
Remove
Remove
filter is
using it
Install th
* If the filte
* If the filte
* Be carefu
filter.
7 OP
Norm
Discharge
Discharg
Fan e
* Once a
is turne
* Elimina
* If the ca
8 TR
Be su
●
Pro
Dischar
Disch
Alarm
Dischar
Disch
Alarm
Fan
Disch
Alarm
* Indicator