(3) Parameter clear
Initializes the parameter values to the factory settings. The calibration values are
not initialized.
(Parameter values are not cleared by setting "1" in Pr. 77 "parameter write disable selection")
Note: The Pr. 75, Pr. 180 to Pr. 183, Pr. 190 to Pr. 192, and Pr.901 to Pr. 905 values are
not initialized.
(4) All clear
Initializes the parameter values and calibration values to the factory settings.
Note: The Pr. 75 value is not initialized.
SET
Cancel
SET
SET
Cancel
SET
57
OPERATION/CONTROL
Flicker
SET
Flicker
SET
3