Mitsubishi Electric FR-E560 Series Instruction Manual page 39

<System configuration example>
(1) Connection of a computer to the inverter (1:1 connection)
Computer
RS-485
interface/
terminal
Computer-inverter connection cable
For a connection cable between the computer having RS-232C and the inverter (RS-
232C⇔RS-485 converter), refer to the table below.
Example of product available on the market (as of Oct., 2003)
Model
FA-T-RS40 *
* The converter cable cannot connect two or more inverters (the computer and
inverter are connected on a 1:1 basis). Since the product is packed with the RS-
232C cable and RS-485 cable (10BASE-T + RJ-45 connector), the cable and
connector need not be prepared separately. Contact a maker for details of the
product.
REMARKS
Refer to the following when fabricating the cable on the user side.
Example of product available on the market (as of Oct., 2003)
Product
1) 10BASE-T cable
2) RJ-45 connector
Station 0
Inverter
RS-485
RS-232C
connector
cable
RJ-45 connector 2)
10BASE-T cable 1)
Maker
Mitsubishi Electric Engineering Co., Ltd.
Model
SGLPEV-T 0.5mm × 4P
* Do not use No. 2 and No. 8
pin (P5S).
5-554720-3
29
INSTALLATION AND WIRING
Station 0
Computer
Inverter
RS-232C
connector
RS-485
Max. 15m
connector
(49.21 feet)
RS-232C RS-485
converter
10BASE-T cable 1)
Mitsubishi Cable Industries, Ltd.
Tyco Electronics Corporation
RJ-45 connector 2)
Maker
2