Mitsubishi Electric FR-E560 Series Instruction Manual page 140

6)Response time
Data sending time
Computer
Inverter
Inverter
Computer
Data sending time
Computer
Inverter
Inverter
Computer
[Formula for data sending time]
1
Communication speed (bps)
Communication specification
Name
Stop bit length
Data length
Parity
check
In addition to the bits in the above table, 1 bit is required for the start bit.
Minimum total number of bits....... 9 bits
Maximum total number of bits...... 12 bits
(refer to the following formula)
Inverter data processing time = waiting time + data check time
STX
Data sending time
(refer to the following formula)
Inverter data processing time = waiting time + data check time
Data sending time
Number of data
x characters
(Refer to page 128)
Number of Bits
1 bit
2 bits
7 bits
8 bits
Yes 1 bit
No 0 bit
(set value 10ms)
ACK ENQ
10ms or
10ms or
more required
more required
(refer to the following formula)
(set value 10ms)
ENQ
10ms or
more required
(refer to the following formula)
Communication
specification
x
(Total number of bits)
(See below)
130
PARAMETERS
(12ms)
(12ms)
Data
= sending
time (s)