●
Displaying or hiding the PinP sub window.
You can select whether to display or hide the PinP sub window.
Procedure
1. Touch any switch (except
2. Select
from the operation guide.
The PinP sub window is displayed or hidden.
Note
• By using RadiCS / RadiCS LE, you can display or hide the PinP sub window more easily using the mouse or
keyboard (Hide-and-Seek). Refer to RadiCS / RadiCS LE User's Manual for details.
●
Setting the input signal for the PinP sub window
Select a signal to be displayed on the PinP sub window when the main screen displays the
"DisplayPort 1" signal in single screen mode.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "PinP", then
3. Select "Input", then
4. Select "DisplayPort 2" or "DVI", then
●
Setting the display position of the PinP sub window
You can set the display position of the PinP sub window.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "PinP", then
3. Select "Position" then
4. Select "Upper Right", "Lower Right", "Lower Left", or "Upper Left", then select
●
Setting display mode (CAL Switch Mode) for the PinP sub window
You can specify the display mode for the PinP sub window.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "PinP", then
3. Select "CAL Switch Mode", then
4. Select a display mode, then
Attention
• Medical images must be shown on the PinP main screen. We recommend that the sub window be used to
display text, etc.
).
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 2 Adjusting the Screen
13