Table of Contents
Advertisement
2.3 Displaying the Screen
1. If using AC power, check if the AC main power switch is on. (It is on when the product is
shipped.)
When it is on,
2. Press
to turn on the power of the monitor.
The control buttons on the monitor will light up green.
Note
• The default language setting for this product is English, but Japanese message screens are
used in this Setup Manual. For information on switching languages, refer to the User's Manual of
the monitor.
3. Turn on your PC.
The screen image appears.
If the screen image does not appear after turning on the PC, refer to "No Picture" in the
User's Manual.
4. The brightness of the screen can be adjusted to suit the installation environment or
personal preference.
Setting range: 0% to 100%
will light up in green.
Installation / Connection | 2
Off
On
19
Advertisement
Table of Contents
