2-3. Setting Screen Layout (Single / Dual) and Input
Signal
You can select single screen or dual screen (PbyP) mode, as well as the input signal.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "Input", then
3. Select a signal or combination of signals to be displayed from "DisplayPort 1", "DVI", "DisplayPort
1 / DisplayPort 2", and "DisplayPort 1 / DVI", then select
In dual screen mode, the "DisplayPort 1" (
"DisplayPort 2" (
Note
• When the setting is complete, the input port names appear.
.
) input signal is shown on the left side of the screen, and the
) or "DVI" input signal on the right.
Example:
For DisplayPort 1 / DisplayPort 2
.
.
Chapter 2 Adjusting the Screen
11