2-5. Selecting Display Mode (CAL Switch Mode)
The display mode can be selected according to the monitor application. For information on how to specify
the display mode for the PinP sub window, see
sub window" (page
13).
Display Modes
Mode
1-DICOM
2-CAL1
3-CAL2
4-Custom
5-sRGB
6-Text
Procedure
1. Touch any switch (except
2. Select
from the operation guide.
The Mode menu appears on the lower right.
Example:
3. Modes are changed in sequence each time you select
You can also select
Note
• The Setting menu and Mode menu cannot be displayed at the same time.
14
Chapter 2 Adjusting the Screen
Enables display using DICOM Part 14-compliant grayscale characteristics.
Displays the calibration status using calibration software.
Select this mode to configure desired settings.
Suitable for color matching with sRGB compatible peripherals.
Suitable to display documents, spreadsheets, or other text.
).
1-DICOM
↓ ↑
2-CAL1
↓ ↑
3-CAL2
↓ ↑
4-Custom
↓ ↑
5-sRGB
↓ ↑
6-Text
or
to change modes when the Mode menu is being displayed.
"Setting display mode (CAL Switch Mode) for the PinP
Purpose
.
√: Can be calibrated
√
√
√
-
-
-