PowerXL STIRMAX MC107D Series Use & Care Manual page 18

RISOTTO
1. Assemble the stirring paddle onto the stirring motor shaft.
2. Plug in the appliance. The default display (----) will start flashing.
3. Press the Cooking Preset Button until the LED adjacent to RISOTTO function
is illuminated.
4. The display will show the default cooking time of 45 minutes. To adjust the
cooking time, press or hold the TIME arrows.
5. The default stir setting is STIR HIGH. This means the stirring will be active at
all times until the cooking is complete. To adjust the stirring setting, press the
Stir Setting button.
6. When the START/STOP button is pressed, the appliance will preheat. Once
preheated, the unit will beep twice and start the cooking cycle. Add your
ingredients at this time and cover with the glass lid. The program will boil the
risotto for 15 minutes and then switch to a gentle simmer for the remainder of
the cooking cycle.
7. When the cooking cycle is complete, the appliance will beep three times and
automatically switch to KEEP WARM. The display will start counting up from
zero to 4 hours (00:00 to 04:00).
SAUTÉ
1. Assemble the stirring paddle onto the stirring motor shaft unless you do not
plan to use the Stir function.
2. Plug in the appliance. The default display (----) will start flashing.
3. Press the Cooking Preset Button until the LED adjacent to SAUTÉ function is
illuminated.
4. The default cooking time is 10 minutes. To adjust the cooking time, press or
hold the TIME arrows.
5. The default stir setting is STIR LOW. This means the stirring will be active in 30
second increments. To adjust the stir setting, press the Stir Setting button.
6. Press the START/STOP button to start the preheating cycle. The display will
gradually illuminate the border of the display to indicate preheating progress.
Once preheat is complete, the appliance will beep twice and begin the
cooking timer.
7. Add ingredients to the cooking pot.
8. When the cooking cycle is complete, the appliance will beep three times.
NOTE: The SAUTÉ function can also be used for searing meat by turning the stir
setting to STIR OFF and removing the stirring paddle before the start of the cooking
cycle.
18
MC107DSeries_30398_ESF_IB_A.indd 18 MC107DSeries_30398_ESF_IB_A.indd 18 2/19/24 10:40 AM 2/19/24 10:40 AM