Table of Contents
Advertisement
Available languages
Available languages
Using The Digital Control Panel
1.
Stir Settings: 4 stir settings are available: STIR HIGH, STIR LOW, STIR DELAY, and STIR OFF.
Each Cooking Mode has a default stir setting.
To change the Stir Setting, push the Stir Setting button (2) until the desired stir mode light is illuminated.
NOTE: Stir Delay will start stirring at the halfway point of the cooking time. This allows enough time for meat to
become tender.
2.
Stir Setting Button
3.
Digital LED Time and Temperature Display: The display will show the default time and temperature
settings when a cooking mode is selected.
4.
Cooking Preset Button
5.
Cooking Presets: 9 cooking presets are available: STIRMAX, BRAISEMAX, SLOW COOK, STEW/SOUP,
KEEP WARM, STEAM/BOIL, RISOTTO, SAUTÉ, and RICE.
To select a cooking mode, push the Cooking Preset Button (4) until the desired function light is blinking.
Once a preset is blinking, the preset time and temperature will be displayed. Press the the START/STOP button
to begin the cooking cycle.
NOTE: Each function has a default stir setting that can be adjusted manually by pressing the Stir Setting button
until the desired setting is selected.
6.
Time and Temperature Adjustment Buttons: To adjust the cooking time or temperature, press the
corresponding Up or Down buttons to select the desired value. The time or temperature may be changed at any
time during the cooking process.
NOTE: For SLOW COOK mode, the temperature arrows select between HI and LO mode.
TIP: Hold the arrow buttons down to adjust the setting more quickly. To switch back and forth between
°F and °C, hold both TEMP buttons for 3 seconds.
7.
START/STOP Button: Press START/STOP Button to begin the cooking process. Press the START/STOP button to
stop any cooking process immediately.
NOTES:
• Preheating - When a cooking mode that requires preheating is selected, the outside border of the display will
progressively light up until the unit is ready to start the cooking. Once the unit is preheated, it will
beep twice and begin the cooking cycle.
• Showing POT - The display will show "POT" and beep every five seconds if the pot is removed during an active
cooking cycle or if cycle tries to start without the Cooking Pot in place. To stop showing "POT", press
the STOP button.
• Showing HOT - After the Cooking Pot is removed when the cooking cycle is complete, the display will show "HOT"
until the heating plate cools down to a safe temperature.
MC107DSeries_30398_ESF_IB_A.indd 11
MC107DSeries_30398_ESF_IB_A.indd 11
1
2
6
7
3
4
6
5
11
2/19/24 10:40 AM
2/19/24 10:40 AM
Advertisement
Table of Contents
