Table of Contents
Advertisement
INSTALLATION REGISTER SHEET
6.
NOTES TO THE TECHNICIAN/INSTALLER: read this manual carefully. If in doubt, contact your dealer's Technical Support
Service (T.A.S.). The data marked with the symbol * must be filled in by the technician/installer and transcribed by
him/herself to the WARRANTY page. This sheet must be kept by the installer and may be requested by the distributor in
order to improve after-sales service and customer service. The technician who performs the installation and commis-
sioning of the equipment must have adequate technical training.
INFORMATION ON THE USE OF THE EQUIPMENT:
Origin of the water to be treated:
PUBLIC SUPPLY NETWORK
OTHER
* Pre-treatment of the equipment:
* Hardness of entry to the equipment (ºF):
* TDS of entry to the equipment (ppm):
* TDS produced water (ppm):
Inlet pressure to the equipment (bar):
INSTALLATION STEP CONTROL:
Pre-filter assembly:
Overflow installation:
Start-up according to protocol:
Checking of fittings:
Measurement of inlet hardness:
Output hardness measurement:
COMMENTS
* Result of installation and commissioning:
CORRECT (equipment installed and working correctly. Produced water suitable for the application).
OTHER:
IDENTIFICATION OF THE AUTHORISED TECHNICIAN/INSTALLER: CONFORMITY OF THE OWNER OF THE EQUIPMENT:
COMPANY AND/OR AUTHORIZED INSTALLER, DATE AND SIGNATURE:
*Ref: Maintenance contract:
ACCEPTS the maintenance contract
DOES NOT ACCEPT the maintenance contract
Model/Ref:
Owner:
Street
Telephone:
City:
Province:
Data sheet
Installation of isolation by-pass:
Correct drainage installation:
Brine suction test/tank filling:
Leakage of the pressurised system:
Programming of the equipment:
Adjustment of residual hardness:
I have been clearly informed of the use, operation and mainte-
nance required by the installed equipment, having been offered
a maintenance contract and informed of how to contact a cus-
tomer service in the event of a request for information, commu-
nication of a breakdown or malfunction, request for maintenan-
ce or intervention by a technician.
Remarks:
SERIAL NUMBER
EQUIPMENT WARRANTY DIRECTED TO THE DISTRIBUTOR:
The distributor will only be responsible for the replacement of
parts in the event of non-conformity. The repair of the equip-
ment and the costs involved (labour, shipping costs, travel, etc.)
will be borne by the distributor, in accordance with the general
conditions of contract and sale, so it can not be passed on later
to the manufacturer.
C.P.:
Advertisement
Table of Contents
