Paradyne COMSPHERE 6800 Series Communications Products Support Configuration Manual page 35

COMSPHERE 6800 Series Network Management System
Command
Change Call Directory
Change Canned
Message
Change Directory
Change Exception
Reporting Thresholds
Change External
Leads States
Change Line
Designator
Change Multiplexer
Change Options
Change Port Options
Change Port Speed(s)
Change Protocol
Mode
Change Telephone
Number(s)
Change Thresholds
Dial
Dial Mode
Dial Standby
Disable/Enable
*All indicates that the command can be executed for APL, DDD, and DDS devices.
**Does not execute for 3900 Series APL devices.
***Does not execute for 3800 Series DDDs.
2-2
Modem Configuration Commands
Command APL/
Abbrevi- DDD/ Disruptive
ation DDS*
chcd APL**
DDD
chcm APL**
chd DDD
chert All**
All**
chels
chld APL**
chm APL**
cho All
chpo APL**
DDS
chpsp APL**
DDS
chpm All**
***
chtn APL**
DDD
cht APL**
dial APL**
DDD
dm All**
ds All**
de All
Table 2-1
(2 of 3)
No To change the telephone numbers stored in the
call directory of a 3400/4400 Series modem
equipped with SCAA, a 3600 Series DBM or a
3800 Series DDD modem.
No To change the message stored in a 3400/4400
Series modem.
No To overwrite the telephone numbers and
comments in a DATAPHONE II 2296 modem's
autocall dialer.
No To set or change the failure thresholds for
network tests supported by exception reports.
No The change the state of the two external control
interface leads in a COMSPHERE device.
No To change the line designator message stored in
a 3400/4400 Series modem.
Yes To change the speed of a device and/or its
multiplexer options.
Yes To change the options of a device.
Yes To change the options on one or more ports of a
3400/4400 Series modem or a 3600 Series DSU
equipped with MSD/TDM.
Yes To change the port speed configuration on the
ports of a 3400/4400 Series modem or a 3600
Series DSU equipped with TDM.
Yes To change the protocol mode of a device and its
downstream devices.
Yes To change the telephone numbers of a 3400/
4400 Series modem with ACAA or a local 3600
Series DSU with a DBM.
No To set the thresholds for parameters that define
alarms in a 3400/4400 Series modem.
No To have a device call out.
Yes To switch a 3400/4400 Series modem from APL
to DDD or a 3600 Series DSU from DDS to
DDD.
To switch a 3400/4400 Series modem from DDD
Yes
to APL or a 3600 Series DSU from DDD to DDS.
Yes To enable/disable the transmitter on a device.
January 1997
Usage
6800-A2-GB20-20