Paradyne 3800 Release Note page 77

3. The system displays many message including the following significant ones:
Loading fonts
Loading configuration script
Loading packet driver
For further information on installation and startup –
Please refer to the C:\XONE\README or C:\EXODUS\README file.
Installation Completed
4. Determine if the workstation connects to the host or a UIP (either uip-1 or uip-2).
For the 15000 platform, the division of full-feature workstations
among the three processors should be:
Configurations with fewer full-feature workstations should retain
equivalent ratios among the processors for best performance.
5. If the workstation is connected to a UIP and while still in the \EXODUS directory:
TYPE: COPY UIP.CFG EXODUS.CFG
PRESS: Enter
TYPE: edit EXODUS.CFG
PRESS: Enter
The DOS editor displays the CFG file. Find the line which starts with
CONN_COMMAND and change WSNAME to the name of the workstation. Find
the line beginning with CONN_HOST and change NMSUIP to the name of the UIP.
6. If the workstation is connected to an NMS host and while still in the \EXODUS directory:
TYPE: COPY HOST.CFG EXODUS.CFG
PRESS: Enter
TYPE: edit EXODUS.CFG
PRESS: Enter
The DOS editor displays the CFG file. Find the line which starts with
CONN_COMMAND and change WSNAME to the name of the workstation. Find
the line beginning with CONN_HOST and change NMSHOST to the name of the NMS
host.
7. Reboot the processor to ensure that all changed parameters are properly loaded.
NOTE
Host Uip-1 Uip-2
7 3 14
76