Paradyne 3800 Release Note page 48

9. Using the
10. To confirm your intention to exit,
11. The system automatically reboots. Follow the standard procedure for starting up a
Installing Whitepine Exodus Software with Intel EtherExpress Card and a 14 I or 17 I Monitor
To install the Whitepine Exodus software when an Intel EtherExpress card is used, perform the
following steps:
1. Insert the Whitepine eXodus Installation disk into the drive and
2. The system prompts:
3. The system prompts:
4. The system prompts:
5. The system prompts:
keys at the SurePath BIOS Setup Main menu,
SELECT: Exit Setup
PRESS: Enter
PRESS: Enter
full-feature workstation.
TYPE: A:install
PRESS: Enter
Enter the floppy drive to use [A:]:
PRESS: Enter
Enter the destination drive to use [C:]:
PRESS: Enter
Enter the destination directory to use [\EXODUS]:
PRESS: Enter
If the directory, C:\EXODUS, does not exist the system prompts:
The directory C:\EXODUS does not exist. OK to create it? (y/n) [y]
TYPE: y
PRESS: Enter
Do you wish to install the fonts (y/n)? [n]
TYPE: y
PRESS: Enter
47