Paradyne 3800 Release Note page 58

5. Select AT&T System Graphics [1MB] from the list of board selections in the next dialog
6. Select Windows 3.1 driver software from the list of software selections in the following
7. Remove the diskette from the a: drive, when instructed, and insert the diskette labeled
8. Click on OK.
9. Double click on the miro MONITOR SELECT icon from the miroWINTOOLS program
10. Select 64 kHz multi frequency for the Monitor option in the miro MONITOR SELECT
11. Select 800 x 600 for the Resolution option in the miro SUPERSCREEN Desktop
After you exit the miroWINTOOLS program, confirm that the Display option for Windows is set
to AT&T System 3264 (800 x 600 256 colors):
1. Select Main from the Program Manager's Window menu.
2. Double click on Windows Setup. The dialog box shows the current display setting.
For the display setting to take effect, you must exit and restart Windows.
Switching Off the Cache on Globalyst 575
The Globalyst 575 may be switched off using the SurePath BIOS Setup Utility which is resident in
the workstation's firmware. Starting the Globalyst 575 powered off, perform the following steps:
1. Power on the workstation and when a box containing tildes appears in the upper right
2. Using the
3. Using the
4. For the BIOS setup, use the
box and click on OK.
dialog box and click on OK.
Miro High Speed Drivers for Windows 2 of 2.
group window.
dialog box and click on OK.
Configuration dialog box and click on OK.
corner of the screen:
PRESS: F1
The SurePath BIOS Setup Main menu appears.
keys,
SELECT: Advanced System Setup
PRESS: Enter
keys on the pop-up menu,
SELECT: Cache Control
PRESS: Enter
The Cache Control screen appears for the BIOS and Video setup.
57
keys to toggle ROM Cacheable to non-cacheable.