Paradyne 3800 Release Note page 59

5. For the Video setup, use the
6. While in the Cache Control screen,
7. At the SurePath BIOS Setup Main menu,
8. To confirm the save,
9. Using the
10. To confirm your intention to exit,
11. The system automatically reboots. Follow the standard procedure for starting up a
Configuring the EtherExpress Card
There are no preinstallation requirements and are no user-configurable switches on the card. You
must, however, configure the card via software for use as a full-feature workstation on the NMS.
To configure the Intel EtherExpress card, perform the following steps:
1. Insert the Intel EtherExpress LAN Adapter Driver and Option diskette into the a: drive.
2. At the C: prompt:
3. Press the spacebar. The main menu appears.
4. Using the
PRESS: Esc (twice)
SELECT: Save Settings
PRESS: Enter
PRESS: Enter
keys at the SurePath BIOS Setup Main menu,
SELECT: Exit Setup
PRESS: Enter
PRESS: Enter
full-feature workstation.
TYPE: a:softset
PRESS: Enter
The Softset Introduction screen appears and prompts:
Press spacebar to continue
keys,
SELECT: Manual Setup
PRESS: Enter
The Manual Setup menu appears.
58
keys to toggle ROM Cacheable to non-cacheable.