Paradyne 3800 Release Note page 86

7. If not installing the Token Ring package, do the following steps. If installing the Token
8. Reboot the processor to ensure that all changed parameters are properly loaded.
Network Configuration of Full-Feature Workstation
The NMS full-feature workstation needs to know about the other processors on the network that it
communicates with. This information is stored in a file \EXODUS\HOSTS, which must contain the
name of each processor and its associated IP address. To configure the full-feature workstation for
proper communication on the LAN, you must perform the following:
1. If using the basic network configuration for the Altos 5000 platform supplied with the
2. If configuring any Altos 15000 or customizing your network configuration for an Altos
3. Add the IP address and NMS host processor name to the \EXODUS\HOSTS file in the
Ring package, continue with the procedure, Installing the Token Ring Software on the
Full-Feature Workstation.
TYPE: cd . .
PRESS: Enter
TYPE: edit autoexec.bat
PRESS: Enter
The DOS editor displays the file. At the end of the file add the following line:
C:\EXODUS\PACKET\STARTPKT
Save the file and exit the editor program.
NMS:
TYPE: COPY \EXODUS\WS.BAS \EXODUS\HOSTS
PRESS: Enter
Stop here. There are no further steps in the basic network configuration process.
5000, or connecting to an existing LAN, consult your Network Administrator for valid IP
address information and perform the following steps:
TYPE: EDIT \EXODUS\HOSTS
PRESS: Enter
format:
nnn.nnn.nnn.nnn host-name
Where: nnn is a number from 1 to 255 inclusive, and
host-name is the name of the NMS host processor
85