Configuration Options - Paradyne COMSPHERE
3610 Quick Reference Manual

Configuration Options

Configuration options are accessed from the Configuration branch of the front panel
menu.
In the following tables, FacT (Factory Tributary) defaults are shown in boldface. If
different from the FacT defaults, FacC (Factory Control) defaults are shown in italics.
Key to symbols:
D
When the Async→Sync configuration option is enabled using the General
branch, the following PrtSp(Kbps) settings do not appear:
32, 24.0, 18.8, 18.0, 9.2, 8.4, 4.4, 4.0, and 2.0 kbps
DD
19.2 Power Level defaults to +6 dB when App Module ID displays XLOOP
LL
V.32 Analog DBM only
A
These configuration options do not appear when Full mode is disabled using
Menu from the Configuration branch.
DSU
Configuration Options
Rate(Kbps)
D
PrtSp(Kbps)
TxClkSource
Msg Clamp
TxElasStor
RxElasStor
DD
19.2 PowrLvl
64KScramblng
64KLatchLpbk
NetIntf
Net ITiming
V.54 Lpbk
Diagnostic DSU
Configuration Options
Diag Type
2nd Ch(bps)
Disr Type
Auto, 64CC, 64L, 56, 38.4, 19.2, 9.6, 4.8, 2.4
64, 56, 48, 38.4, 32, 28.8, 24.0, 19.2, 18.8, 18.0, 16.8, 14.4, 12.0,
9.6, 9.2, 8.4, 7.2, 4.8, 4.4, 4.0, 2.4 , 2.0, 1.2, Disab
Int, RXC, Ext, DDS, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
A Enab, Disab
Enab, Disab
A Enab, Disab
A + 6, 0, –10
A On, Off
A On, Off
A AggSw, Forc, Disab
A Int, NetI, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
A Enab, Disab
NonD, Disr, Mixed, None
A 100, 400, 800, 1200, 1600
2500, 2600, 3600s, 3600e, Br56
Value
Value
22