Paradyne COMSPHERE
3610 Quick Reference Manual page 20

3. Select Opts (for Configuration Options). The following screen appears.
Load from:
Activ
F1
Usr2 Usr3
MPTC MPTT
4. The selections on the screen are configuration option sets stored in the DSU's
memory. Table 1 lists the Load from menu selections and their source.
From the Load from menu, any selection except Remote loads a complete set of
configuration option values into a working buffer.
5. After changing and not saving configuration options, the following prompt appears
when the or
Save Options?
Yes
F1
6. If you press F1 for Yes, the Save to screen appears.
Save to:
Activ
F1
Usr2 Usr3
MPTC MPTT
If Save to is not displayed, press
When you press a function key from the Save to screen, the DSU performs a
verification routine to ensure that the configuration options chosen are compatible.
Remt Usr1
F3
F2
FacC FacT FacB
key is pressed.
No
F2 F3
Remt Usr1
F2 F3
FacC FacT FacB
until the prompt appears.
20