▲ Advanced
NCT6126D HW Monitor
► Smart FAN Function
Smart Fan is a fan speed moderation strategy dependent on the current system temperature.
When the system temperature goes higher than the Boundary setting, the fan speed will be
turned up to the setting of the Fan Speed Count that bears the same index as the Boundary
field.
SYS Smart Fan/CPU Smart Fan Control = [Enabled]
• Boundary 1 to Boundary 4
Set the boundary temperatures that determine the fan speeds accordingly, the value ranging
from 0-127°C. For example, when the system temperature reaches Boundary 1 setting, the fan
speed will be turned up to the designated speed of the Fan Speed Count 1 field.
• Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will operate
according to the specified boundary temperatures above-mentioned.
SYS Smart Fan/CPU Smart Fan Control = [Disabled]
• Fix Fan Speed Count
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will always
operate at the specified speed regardless of gauged temperatures.
User's Manual | CMS631-Q470E/H420E
▲ Advanced
Serial Port Console Redirection
Console Redirection
Console Redirection Enable or Disable.
Console Redirection Settings
See following pages.
Chapter 3
BIOS SETTINGS
33
33